HTS chapter 73
HTS chapter 73: iron and steel articles codes and duty rates
Chapter 73 of the Harmonized Tariff Schedule of the United States has 26 headings and 250 rate lines, split into 577 ten-digit statistical codes. Each heading below lists its rate lines with the official description and the general (Column 1) rate of duty. The general rate is only the starting point: Section 301, Section 232 and other programs can add to it depending on the country of origin, and the calculator applies them for any line.
7301Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7301.10.00 | Sheet piling7301.10.00.00 | Free |
| 7301.20.10 | Angles, shapes and sections › Of iron or nonalloy steel7301.20.10.00 | Free |
| 7301.20.50 | Angles, shapes and sections › Of alloy steel7301.20.50.00 | Free |
7302Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails
| HTS code | Description | General rate |
|---|---|---|
| 7302.10.10 | Rails › Of iron or nonalloy steel | Free |
| 7302.10.50 | Rails › Of alloy steel | Free |
| 7302.30.00 | Switch blades, crossing frogs, point rods and other crossing pieces | Free |
| 7302.40.00 | Fish-plates and sole plates | Free |
| 7302.90.10 | Sleepers (cross-ties) | Free |
| 7302.90.90 | Other › Other | Free |
7303Tubes, pipes and hollow profiles, of cast iron
| HTS code | Description | General rate |
|---|---|---|
| 7303.00.00 | Tubes, pipes and hollow profiles, of cast iron | Free |
7304Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
| HTS code | Description | General rate |
|---|---|---|
| 7304.11.00 | Line pipe of a kind used for oil or gas pipelines › Of stainless steel | Free |
| 7304.19.10 | Line pipe of a kind used for oil or gas pipelines › Of iron or nonalloy steel | Free |
| 7304.19.50 | Line pipe of a kind used for oil or gas pipelines › Of other alloy steel | Free |
| 7304.22.00 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Drill pipe of stainless steel | Free |
| 7304.23.30 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other drill pipe › Of iron or nonalloy steel | Free |
| 7304.23.60 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other drill pipe › Of alloy steel | Free |
| 7304.24.30 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing › Threaded or coupled | Free |
| 7304.24.40 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Casing | Free |
| 7304.24.60 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Other, of stainless steel › Tubing | Free |
| 7304.29.10 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Casing › Of iron or nonalloy steel › Threaded or coupled | Free |
| 7304.29.20 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Casing › Of iron or nonalloy steel | Free |
| 7304.29.31 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Casing › Of other alloy steel › Threaded or coupled | Free |
| 7304.29.41 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Casing › Of other alloy steel | Free |
| 7304.29.50 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Tubing › Of iron or nonalloy steel | Free |
| 7304.29.61 | Casing, tubing and drill pipe, of a kind used in drilling for oil or gas › Tubing › Of other alloy steel | Free |
| 7304.31.30 | Other, of circular cross section, of iron or nonalloy steel › Cold-drawn or cold-rolled (cold-reduced) › Hollow bars | Free |
| 7304.31.60 | Other, of circular cross section, of iron or nonalloy steel › Cold-drawn or cold-rolled (cold-reduced) | Free |
| 7304.39.00 | Other, of circular cross section, of iron or nonalloy steel | Free |
| 7304.41.30 | Other, of circular cross section, of stainless steel › Cold-drawn or cold-rolled (cold-reduced) › Of an external diameter of less than 19 mm | Free |
| 7304.41.60 | Other, of circular cross section, of stainless steel › Cold-drawn or cold-rolled (cold-reduced) | Free |
| 7304.49.00 | Other, of circular cross section, of stainless steel | Free |
| 7304.51.10 | Other, of circular cross section, of other alloy steel › Cold-drawn or cold-rolled (cold-reduced) › Suitable for use in the manufacture of ball or roller bearings | Free |
| 7304.51.50 | Other, of circular cross section, of other alloy steel › Cold-drawn or cold-rolled (cold-reduced) | Free |
| 7304.59.10 | Other, of circular cross section, of other alloy steel › Suitable for use in the manufacture of ball or roller bearings | Free |
| 7304.59.20 | Other, of circular cross section, of other alloy steel › Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | Free |
| 7304.59.60 | Other, of circular cross section, of other alloy steel › Of heat-resisting steel | Free |
| 7304.59.80 | Other, of circular cross section, of other alloy steel7304.59.80.20 | Free |
| 7304.90.10 | Having a wall thickness of 4 mm or more › Of iron or nonalloy steel | Free |
| 7304.90.30 | Having a wall thickness of 4 mm or more › Of alloy steel | Free |
| 7304.90.50 | Having a wall thickness of less than 4 mm: › Of iron or nonalloy steel | Free |
| 7304.90.70 | Having a wall thickness of less than 4 mm: › Of alloy steel | Free |
7305Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7305.11.10 | Line pipe of a kind used for oil or gas pipelines › Longitudinally submerged arc welded › Of iron or nonalloy steel7305.11.10.60 | Free |
| 7305.11.50 | Line pipe of a kind used for oil or gas pipelines › Longitudinally submerged arc welded › Of alloy steel | Free |
| 7305.12.10 | Line pipe of a kind used for oil or gas pipelines › Other, longitudinally welded › Of iron or nonalloy steel | Free |
| 7305.12.50 | Line pipe of a kind used for oil or gas pipelines › Other, longitudinally welded › Of alloy steel | Free |
| 7305.19.10 | Line pipe of a kind used for oil or gas pipelines › Of iron or nonalloy steel | Free |
| 7305.19.50 | Line pipe of a kind used for oil or gas pipelines › Of alloy steel | Free |
| 7305.20.20 | Casing of a kind used in drilling for oil or gas › Of iron or nonalloy steel › Threaded or coupled | Free |
| 7305.20.40 | Casing of a kind used in drilling for oil or gas › Of iron or nonalloy steel | Free |
| 7305.20.60 | Casing of a kind used in drilling for oil or gas › Of alloy steel › Threaded or coupled | Free |
| 7305.20.80 | Casing of a kind used in drilling for oil or gas › Of alloy steel | Free |
| 7305.31.20 | Other, welded › Longitudinally welded › Tapered pipes and tubes of steel principally used as parts of illuminating articles | Free |
| 7305.31.40 | Other, welded › Longitudinally welded › Of iron or nonalloy steel | Free |
| 7305.31.60 | Other, welded › Longitudinally welded › Of alloy steel | Free |
| 7305.39.10 | Other, welded › Of iron or nonalloy steel | Free |
| 7305.39.50 | Other, welded › Of alloy steel | Free |
| 7305.90.10 | Of iron or nonalloy steel | Free |
| 7305.90.50 | Of alloy steel | Free |
7306Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7306.11.00 | Line pipe of a kind used for oil or gas pipelines › Welded, of stainless steel | Free |
| 7306.19.10 | Line pipe of a kind used for oil or gas pipelines › Of iron or nonalloy steel | Free |
| 7306.19.51 | Line pipe of a kind used for oil or gas pipelines › Of alloy steel | Free |
| 7306.21.30 | Casing and tubing of a kind used in drilling for oil or gas › Welded of stainless steel › Casing › Threaded or coupled | Free |
| 7306.21.40 | Casing and tubing of a kind used in drilling for oil or gas › Welded of stainless steel › Casing | Free |
| 7306.21.80 | Casing and tubing of a kind used in drilling for oil or gas › Welded of stainless steel › Tubing | Free |
| 7306.29.10 | Casing and tubing of a kind used in drilling for oil or gas › Casing › Of iron or nonalloy steel › Threaded or coupled | Free |
| 7306.29.20 | Casing and tubing of a kind used in drilling for oil or gas › Casing › Of iron or nonalloy steel | Free |
| 7306.29.31 | Casing and tubing of a kind used in drilling for oil or gas › Casing › Threaded or coupled | Free |
| 7306.29.41 | Casing and tubing of a kind used in drilling for oil or gas › Casing | Free |
| 7306.29.60 | Casing and tubing of a kind used in drilling for oil or gas › Tubing › Of iron or nonalloy steel | Free |
| 7306.29.81 | Casing and tubing of a kind used in drilling for oil or gas › Tubing | Free |
| 7306.30.10 | Other, welded, of circular cross section, of iron or nonalloy steel › Having a wall thickness of less than 1.65 mm | Free |
| 7306.30.30 | Other, welded, of circular cross section, of iron or nonalloy steel › Having a wall thickness of 1.65 mm or more › Tapered steel pipes and tubes principally used as parts of illuminating articles | Free |
| 7306.30.50 | Other, welded, of circular cross section, of iron or nonalloy steel › Having a wall thickness of 1.65 mm or more7306.30.50.28 | Free |
| 7306.40.10 | Other, welded, of circular cross section, of stainless steel › Having a wall thickness of less than 1.65 mm | Free |
| 7306.40.50 | Other, welded, of circular cross section, of stainless steel › Having a wall thickness of 1.65 mm or more7306.40.50.057306.40.50.40 | Free |
| 7306.50.10 | Other, welded, of circular cross section, of other alloy steel › Having a wall thickness of less than 1.65 mm | Free |
| 7306.50.30 | Other, welded, of circular cross section, of other alloy steel › Having a wall thickness of 1.65 mm or more › Tapered pipes and tubes of steel principally used as parts of illuminating articles | Free |
| 7306.50.50 | Other, welded, of circular cross section, of other alloy steel › Having a wall thickness of 1.65 mm or more | Free |
| 7306.61.10 | Other, welded, of noncircular cross section › Of square or rectangular cross section › Having a wall thickness of 4 mm or more › Of iron or nonalloy steel | Free |
| 7306.61.30 | Other, welded, of noncircular cross section › Of square or rectangular cross section › Having a wall thickness of 4 mm or more › Of alloy steel | Free |
| 7306.61.50 | Other, welded, of noncircular cross section › Of square or rectangular cross section › Having a wall thickness of less than 4 mm: › Of iron or nonalloy steel | Free |
| 7306.61.70 | Other, welded, of noncircular cross section › Of square or rectangular cross section › Having a wall thickness of less than 4 mm: › Of alloy steel | Free |
| 7306.69.10 | Other, welded, of noncircular cross section › Of other noncircular cross section › Having a wall thickness of 4 mm or more › Of iron or nonalloy steel | Free |
| 7306.69.30 | Other, welded, of noncircular cross section › Of other noncircular cross section › Having a wall thickness of 4 mm or more › Of alloy steel | Free |
| 7306.69.50 | Other, welded, of noncircular cross section › Of other noncircular cross section › Having a wall thickness of less than 4 mm: › Of iron or nonalloy steel | Free |
| 7306.69.70 | Other, welded, of noncircular cross section › Of other noncircular cross section › Having a wall thickness of less than 4 mm: › Of alloy steel | Free |
| 7306.90.10 | Of iron or nonalloy steel | Free |
| 7306.90.50 | Of alloy steel | Free |
7307Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7307.11.00 | Cast fittings › Of nonmalleable cast iron | 4.8% |
| 7307.19.30 | Cast fittings › Ductile fittings7307.19.30.707307.19.30.85 | 5.6% |
| 7307.19.90 | Cast fittings | 6.2% |
| 7307.21.10 | Other, of stainless steel › Flanges › Not machined, not tooled and not otherwise processed after forging | 3.3% |
| 7307.21.50 | Other, of stainless steel › Flanges | 5.6% |
| 7307.22.10 | Other, of stainless steel › Threaded elbows, bends and sleeves › Sleeves (couplings)7307.22.10.00 | Free |
| 7307.22.50 | Other, of stainless steel › Threaded elbows, bends and sleeves | 6.2% |
| 7307.23.00 | Other, of stainless steel › Butt welding fittings | 5% |
| 7307.29.00 | Other, of stainless steel7307.29.00.90 | 5% |
| 7307.91.10 | Flanges › Not machined, not tooled and not otherwise processed after forging › Of iron or nonalloy steel | 3.3% |
| 7307.91.30 | Flanges › Not machined, not tooled and not otherwise processed after forging › Of alloy steel (except stainless steel) | 3.2% |
| 7307.91.50 | Flanges | 5.5% |
| 7307.92.30 | Threaded elbows, bends and sleeves › Sleeves (couplings)7307.92.30.30 | Free |
| 7307.92.90 | Threaded elbows, bends and sleeves7307.92.90.00 | 6.2% |
| 7307.93.30 | Butt welding fittings › With an inside diameter of less than 360 mm › Of iron or nonalloy steel | 6.2% |
| 7307.93.60 | Butt welding fittings › With an inside diameter of less than 360 mm › Of alloy steel (except stainless steel) | 5.5% |
| 7307.93.90 | Butt welding fittings › With an inside diameter of 360 mm or more | 4.3% |
| 7307.99.10 | Not machined, not tooled and not otherwise processed after forging › Of iron or nonalloy steel | 3.7% |
| 7307.99.30 | Not machined, not tooled and not otherwise processed after forging › Of alloy steel (except stainless steel) | 3.2% |
| 7307.99.50 | Other › Other › Other7307.99.50.45 | 4.3% |
7308Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7308.10.00 | Bridges and bridge sections | Free |
| 7308.20.00 | Towers and lattice masts | Free |
| 7308.30.10 | Doors, windows and their frames and thresholds for doors › Of stainless steel | Free |
| 7308.30.50 | Doors, windows and their frames and thresholds for doors7308.30.50.50 | Free |
| 7308.40.00 | Equipment for scaffolding, shuttering, propping or pit- propping7308.40.00.00 | Free |
| 7308.90.30 | Columns, pillars, posts, beams, girders and similar structural units › Not in part of alloy steel7308.90.30.00 | Free |
| 7308.90.60 | Columns, pillars, posts, beams, girders and similar structural units | Free |
| 7308.90.70 | Steel grating | Free |
| 7308.90.95 | Other › Other › Other7308.90.95.607308.90.95.90 | Free |
7309Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
| HTS code | Description | General rate |
|---|---|---|
| 7309.00.00 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment7309.00.00.30 | Free |
7310Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
| HTS code | Description | General rate |
|---|---|---|
| 7310.10.00 | Of a capacity of 50 liters or more | Free |
| 7310.21.00 | Of a capacity of less than 50 liters: › Cans which are to be closed by soldering or crimping | Free |
| 7310.29.00 | Of a capacity of less than 50 liters: | Free |
7311Containers for compressed or liquefied gas, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7311.00.00 | Containers for compressed or liquefied gas, of iron or steel7311.00.00.90 | Free |
7312Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated
| HTS code | Description | General rate |
|---|---|---|
| 7312.10.05 | Stranded wire, ropes and cables › Stranded wire › Of stainless steel › Fitted with fittings or made up into articles | Free |
| 7312.10.10 | Stranded wire, ropes and cables › Stranded wire › Of stainless steel | Free |
| 7312.10.20 | Stranded wire, ropes and cables › Stranded wire › Fitted with fittings or made up into articles | Free |
| 7312.10.30 | Stranded wire, ropes and cables › Stranded wire | Free |
| 7312.10.50 | Stranded wire, ropes and cables › Ropes, cables and cordage other than stranded wire › Of stainless steel › Fitted with fittings or made up into articles | Free |
| 7312.10.60 | Stranded wire, ropes and cables › Ropes, cables and cordage other than stranded wire › Of stainless steel | Free |
| 7312.10.70 | Stranded wire, ropes and cables › Ropes, cables and cordage other than stranded wire › Fitted with fittings or made up into articles7312.10.70.00 | Free |
| 7312.10.80 | Stranded wire, ropes and cables › Ropes, cables and cordage other than stranded wire › Of brass plated wire | Free |
| 7312.10.90 | Stranded wire, ropes and cables › Ropes, cables and cordage other than stranded wire7312.10.90.90 | Free |
| 7312.90.00 | Other | Free |
7313Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7313.00.00 | Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel7313.00.00.00 | Free |
7314Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7314.12.10 | Woven cloth › Endless bands for machinery, of stainless steel › With meshes not finer than 12 wires to the lineal centimeter in warp or filling | Free |
| 7314.12.20 | Woven cloth › Endless bands for machinery, of stainless steel › With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling | Free |
| 7314.12.30 | Woven cloth › Endless bands for machinery, of stainless steel › With meshes finer than 36 wires to the lineal centimeter in warp or filling › Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines › With 94 or more wires to the lineal centimeter | Free |
| 7314.12.60 | Woven cloth › Endless bands for machinery, of stainless steel › With meshes finer than 36 wires to the lineal centimeter in warp or filling › Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines | Free |
| 7314.12.90 | Woven cloth › Endless bands for machinery, of stainless steel › With meshes finer than 36 wires to the lineal centimeter in warp or filling | Free |
| 7314.14.10 | Woven cloth › Other woven cloth, of stainless steel › With meshes not finer than 12 wires to the lineal centimeter in warp or filling | Free |
| 7314.14.20 | Woven cloth › Other woven cloth, of stainless steel › With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling | Free |
| 7314.14.30 | Woven cloth › Other woven cloth, of stainless steel › With meshes finer than 36 wires to the lineal centimeter in warp or maximum › Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines › With 94 or more wires to the lineal centimeter | Free |
| 7314.14.60 | Woven cloth › Other woven cloth, of stainless steel › With meshes finer than 36 wires to the lineal centimeter in warp or maximum › Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines | Free |
| 7314.14.90 | Woven cloth › Other woven cloth, of stainless steel › With meshes finer than 36 wires to the lineal centimeter in warp or maximum | Free |
| 7314.19.01 | Woven cloth | Free |
| 7314.20.00 | Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more | Free |
| 7314.31.10 | Other grill, netting and fencing, welded at the intersection › Plated or coated with zinc › Wire fencing plated or coated with zinc, whether or not covered with plastic material7314.31.10.00 | Free |
| 7314.31.50 | Other grill, netting and fencing, welded at the intersection › Plated or coated with zinc | Free |
| 7314.39.00 | Other grill, netting and fencing, welded at the intersection | Free |
| 7314.41.00 | Other grill, netting and fencing › Plated or coated with zinc | Free |
| 7314.42.00 | Other grill, netting and fencing › Coated with plastics | Free |
| 7314.49.30 | Other grill, netting and fencing › Not cut to shape | Free |
| 7314.49.60 | Other grill, netting and fencing › Cut to shape | Free |
| 7314.50.00 | Expanded metal | Free |
7315Chain and parts thereof, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7315.11.00 | Articulated link chain and parts thereof › Roller chain7315.11.00.10 | Free |
| 7315.12.00 | Articulated link chain and parts thereof › Other chain7315.12.00.80 | Free |
| 7315.19.00 | Articulated link chain and parts thereof › Parts | Free |
| 7315.20.10 | Skid chain › Not over 8 mm in diameter | Free |
| 7315.20.50 | Skid chain › Over 8 mm in diameter | Free |
| 7315.81.00 | Other chain › Stud link | Free |
| 7315.82.10 | Other chain › Other, welded link › Of alloy steel › Not over 10 mm in diameter | Free |
| 7315.82.30 | Other chain › Other, welded link › Of alloy steel › Over 10 mm in diameter | Free |
| 7315.82.50 | Other chain › Other, welded link › Of iron or nonalloy steel › Not over 10 mm in diameter | Free |
| 7315.82.70 | Other chain › Other, welded link › Of iron or nonalloy steel › Over 10 mm in diameter | Free |
| 7315.89.10 | Other chain › With links of essentially round cross sections › Not over 8 mm in diameter | 1.5% |
| 7315.89.30 | Other chain › With links of essentially round cross sections › Over 8 mm in diameter | Free |
| 7315.89.50 | Other chain | 3.9% |
| 7315.90.00 | Other parts | 2.9% |
7316Anchors, grapnels and parts thereof, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7316.00.00 | Anchors, grapnels and parts thereof, of iron or steel7316.00.00.00 | Free |
7317Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper
| HTS code | Description | General rate |
|---|---|---|
| 7317.00.10 | Thumb tacks | Free |
| 7317.00.20 | Other, suitable for use in powder-actuated handtools › Not threaded7317.00.20.00 | Free |
| 7317.00.30 | Other, suitable for use in powder-actuated handtools › Threaded | Free |
| 7317.00.55 | Of one piece construction › Made of round wire7317.00.55.03 | Free |
| 7317.00.65 | Of one piece construction | Free |
| 7317.00.75 | Of two or more pieces | Free |
7318Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7318.11.00 | Threaded articles › Coach screws | 12.5% |
| 7318.12.00 | Threaded articles › Other wood screws | 12.5% |
| 7318.13.00 | Threaded articles › Screw hooks and screw rings | 5.7% |
| 7318.14.10 | Threaded articles › Self-tapping screws › Having shanks or threads with a diameter of less than 6 mm | 6.2% |
| 7318.14.50 | Threaded articles › Self-tapping screws › Having shanks or threads with a diameter of 6 mm or more | 8.6% |
| 7318.15.20 | Threaded articles › Other screws and bolts, whether or not with their nuts or washers › Bolts and bolts and their nuts or washers entered or exported in the same shipment7318.15.20.467318.15.20.557318.15.20.95 | Free |
| 7318.15.40 | Threaded articles › Other screws and bolts, whether or not with their nuts or washers › Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws)7318.15.40.00 | Free |
| 7318.15.50 | Threaded articles › Other screws and bolts, whether or not with their nuts or washers › Studs7318.15.50.56 | Free |
| 7318.15.60 | Threaded articles › Other screws and bolts, whether or not with their nuts or washers › Having shanks or threads with a diameter of less than 6 mm7318.15.60.80 | 6.2% |
| 7318.15.80 | Threaded articles › Other screws and bolts, whether or not with their nuts or washers › Having shanks or threads with a diameter of 6 mm or more7318.15.80.85 | 8.5% |
| 7318.16.00 | Threaded articles › Nuts7318.16.00.85 | Free |
| 7318.19.00 | Threaded articles | 5.7% |
| 7318.21.00 | Non-threaded articles › Spring washers and other lock washers | 5.8% |
| 7318.22.00 | Non-threaded articles › Other washers | Free |
| 7318.23.00 | Non-threaded articles › Rivets | Free |
| 7318.24.00 | Non-threaded articles › Cotters and cotter pins | 3.8% |
| 7318.29.00 | Non-threaded articles | 2.8% |
7319Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included
| HTS code | Description | General rate |
|---|---|---|
| 7319.40.20 | Safety pins and other pins › Safety pins | 4.5% |
| 7319.40.30 | Safety pins and other pins › Dressmakers' or common pins | 4.1% |
| 7319.40.50 | Safety pins and other pins | Free |
| 7319.90.10 | Sewing, darning or embroidery needles | Free |
| 7319.90.90 | Other › Other | 2.9% |
7320Springs and leaves for springs, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7320.10.30 | Leaf springs and leaves therefor › Suitable for motor vehicle suspension › To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons | 3.2% |
| 7320.10.60 | Leaf springs and leaves therefor › Suitable for motor vehicle suspension7320.10.60.60 | 3.2% |
| 7320.10.90 | Leaf springs and leaves therefor | 3.2% |
| 7320.20.10 | Helical springs › Suitable for motor-vehicle suspension | 3.2% |
| 7320.20.50 | Helical springs7320.20.50.20 | 3.9% |
| 7320.90.10 | Hairsprings | Free |
| 7320.90.50 | Other › Other7320.90.50.60 | 2.9% |
7321Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7321.11.10 | Cooking appliances and plate warmers › For gas fuel or for both gas and other fuels › Portable7321.11.10.60 | 5.7% |
| 7321.11.30 | Cooking appliances and plate warmers › For gas fuel or for both gas and other fuels › Stoves or ranges | Free |
| 7321.11.60 | Cooking appliances and plate warmers › For gas fuel or for both gas and other fuels | Free |
| 7321.12.00 | Cooking appliances and plate warmers › For liquid fuel | Free |
| 7321.19.00 | Cooking appliances and plate warmers › Other, including appliances for solid fuel | Free |
| 7321.81.10 | Other appliances › For gas fuel or for both gas and other fuels › Portable | 2.9% |
| 7321.81.50 | Other appliances › For gas fuel or for both gas and other fuels | Free |
| 7321.82.10 | Other appliances › For liquid fuel › Portable | 2.9% |
| 7321.82.50 | Other appliances › For liquid fuel | Free |
| 7321.89.00 | Other appliances › Other, including appliances for solid fuel | Free |
| 7321.90.10 | Parts › Of articles in subheading 7321.11.30 › Cooking chambers, whether or not assembled | Free |
| 7321.90.20 | Parts › Of articles in subheading 7321.11.30 › Top surface panels with or without burners or controls | Free |
| 7321.90.40 | Parts › Of articles in subheading 7321.11.30 › Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation | Free |
| 7321.90.50 | Parts › Of articles in subheading 7321.11.30 | Free |
| 7321.90.60 | Parts | Free |
7322Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7322.11.00 | Radiators and parts thereof › Of cast iron | Free |
| 7322.19.00 | Radiators and parts thereof | Free |
| 7322.90.00 | Other, including parts | Free |
7323Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7323.10.00 | Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like7323.10.00.00 | Free |
| 7323.91.10 | Of cast iron, not enameled › Coated or plated with precious metal | Free |
| 7323.91.50 | Of cast iron, not enameled | 5.3% |
| 7323.92.00 | Of cast iron, enameled | Free |
| 7323.93.00 | Of stainless steel7323.93.00.457323.93.00.607323.93.00.80 | 2% |
| 7323.94.00 | Of iron (other than cast iron) or steel, enameled | 2.7% |
| 7323.99.10 | Coated or plated with precious metal › Coated or plated with silver | Free |
| 7323.99.30 | Coated or plated with precious metal | 8.2% |
| 7323.99.50 | Not coated or plated with precious metal › Of tinplate7323.99.50.60 | Free |
| 7323.99.70 | Not coated or plated with precious metal › Cookingware | 5.3% |
| 7323.99.90 | Not coated or plated with precious metal7323.99.90.80 | 3.4% |
7324Sanitary ware and parts thereof, of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7324.10.00 | Sinks and wash basins, of stainless steel | 3.4% |
| 7324.21.10 | Baths › Of cast iron, whether or not enamelled › Coated or plated with precious metal | Free |
| 7324.21.50 | Baths › Of cast iron, whether or not enamelled | Free |
| 7324.29.00 | Baths | Free |
| 7324.90.00 | Other, including parts7324.90.00.00 | Free |
7325Other cast articles of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7325.10.00 | Of nonmalleable cast iron7325.10.00.80 | Free |
| 7325.91.00 | Grinding balls and similar articles for mills | 2.9% |
| 7325.99.10 | Of cast iron | Free |
| 7325.99.50 | Other › Other › Other | 2.9% |
7326Other articles of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7326.11.00 | Forged or stamped, but not further worked › Grinding balls and similar articles for mills | Free |
| 7326.19.00 | Forged or stamped, but not further worked7326.19.00.10 | 2.9% |
| 7326.20.00 | Articles of iron or steel wire7326.20.00.307326.20.00.90 | 3.9% |
| 7326.90.10 | Of tinplate7326.90.10.00 | Free |
| 7326.90.25 | Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length | Free |
| 7326.90.35 | Containers of a kind normally carried on the person, in the pocket or in the handbag | 7.8% |
| 7326.90.45 | Horse and mule shoes | Free |
| 7326.90.60 | Coated or plated with precious metal | 8.6% |
| 7326.90.86 | Other › Other › Other › Other7326.90.86.357326.90.86.88 | 2.9% |
Descriptions and general rates from the current USITC Harmonized Tariff Schedule. The general rate excludes additional duties such as Section 301, Section 232 and antidumping or countervailing duties, which depend on the country of origin.