HTS chapter 72
HTS chapter 72: iron and steel codes and duty rates
Chapter 72 of the Harmonized Tariff Schedule of the United States has 29 headings and 262 rate lines, split into 560 ten-digit statistical codes. Each heading below lists its rate lines with the official description and the general (Column 1) rate of duty. The general rate is only the starting point: Section 301, Section 232 and other programs can add to it depending on the country of origin, and the calculator applies them for any line.
7201Pig iron and spiegeleisen in pigs, blocks or other primary forms
| HTS code | Description | General rate |
|---|---|---|
| 7201.10.00 | Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus | Free |
| 7201.20.00 | Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus | Free |
| 7201.50.30 | Alloy pig iron; spiegeleisen › Alloy pig iron | Free |
| 7201.50.60 | Alloy pig iron; spiegeleisen › Spiegeleisen | Free |
7202Ferroalloys
| HTS code | Description | General rate |
|---|---|---|
| 7202.11.10 | Ferromanganese › Containing by weight more than 2 percent of carbon › Containing by weight more than 2 percent but not more than 4 percent of carbon | 1.4% |
| 7202.11.50 | Ferromanganese › Containing by weight more than 2 percent of carbon › Containing by weight more than 4 percent of carbon | 1.5% |
| 7202.19.10 | Ferromanganese › Containing by weight not more than 1 percent of carbon | 2.3% |
| 7202.19.50 | Ferromanganese › Containing by weight more than 1 percent but not more than 2 percent of carbon | 1.4% |
| 7202.21.10 | Ferrosilicon › Containing by weight more than 55 percent of silicon › Containing by weight more than 55 percent but not more than 80 percent of silicon › Containing by weight more than 3 percent of calcium | 1.1% |
| 7202.21.50 | Ferrosilicon › Containing by weight more than 55 percent of silicon › Containing by weight more than 55 percent but not more than 80 percent of silicon | 1.5% |
| 7202.21.75 | Ferrosilicon › Containing by weight more than 55 percent of silicon › Containing by weight more than 80 percent but not more than 90 percent of silicon | 1.9% |
| 7202.21.90 | Ferrosilicon › Containing by weight more than 55 percent of silicon › Containing by weight more than 90 percent of silicon | 5.8% |
| 7202.29.00 | Ferrosilicon | Free |
| 7202.30.00 | Ferrosilicon manganese7202.30.00.607202.30.00.90 | 3.9% |
| 7202.41.00 | Ferrochromium › Containing by weight more than 4 percent of carbon | 1.9% |
| 7202.49.10 | Ferrochromium › Containing by weight more than 3 percent of carbon | 1.9% |
| 7202.49.50 | Ferrochromium | 3.1% |
| 7202.50.00 | Ferrosilicon chromium | 10% |
| 7202.60.00 | Ferronickel | Free |
| 7202.70.00 | Ferromolybdenum | 4.5% |
| 7202.80.00 | Ferrotungsten and ferrosilicon tungsten | 5.6% |
| 7202.91.00 | Ferrotitanium and ferrosilicon titanium | 3.7% |
| 7202.92.00 | Ferrovanadium | 4.2% |
| 7202.93.40 | Ferroniobium › Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon | 5% |
| 7202.93.80 | Ferroniobium | 5% |
| 7202.99.10 | Ferrozirconium | 4.2% |
| 7202.99.20 | Calcium silicon | 5% |
| 7202.99.80 | Other › Other › Other | 5% |
7203Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms
| HTS code | Description | General rate |
|---|---|---|
| 7203.10.00 | Ferrous products obtained by direct reduction of iron ore | Free |
| 7203.90.00 | Other | Free |
7204Ferrous waste and scrap; remelting scrap ingots of iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7204.10.00 | Waste and scrap of cast iron | Free |
| 7204.21.00 | Waste and scrap of alloy steel › Of stainless steel | Free |
| 7204.29.00 | Waste and scrap of alloy steel | Free |
| 7204.30.00 | Waste and scrap of tinned iron or steel | Free |
| 7204.41.00 | Other waste and scrap › Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | Free |
| 7204.49.00 | Other waste and scrap | Free |
| 7204.50.00 | Remelting scrap ingots | Free |
7205Granules and powders, of pig iron, spiegeleisen, iron or steel
| HTS code | Description | General rate |
|---|---|---|
| 7205.10.00 | Granules | Free |
| 7205.21.00 | Powders › Of alloy steel | Free |
| 7205.29.00 | Powders | Free |
7206Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203)
| HTS code | Description | General rate |
|---|---|---|
| 7206.10.00 | Ingots | Free |
| 7206.90.00 | Other | Free |
7207Semifinished products of iron or nonalloy steel
| HTS code | Description | General rate |
|---|---|---|
| 7207.11.00 | Containing by weight less than 0.25 percent of carbon › Of rectangular (including square) cross section, the width measuring less than twice the thickness | Free |
| 7207.12.00 | Containing by weight less than 0.25 percent of carbon › Other, of rectangular (other than square) cross section | Free |
| 7207.19.00 | Containing by weight less than 0.25 percent of carbon | Free |
| 7207.20.00 | Containing by weight 0.25 percent or more of carbon | Free |
7208Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
| HTS code | Description | General rate |
|---|---|---|
| 7208.10.15 | In coils, not further worked than hot-rolled, with patterns in relief › Pickled7208.10.15.00 | Free |
| 7208.10.30 | In coils, not further worked than hot-rolled, with patterns in relief › Of a thickness of 4.75 mm or more7208.10.30.00 | Free |
| 7208.10.60 | In coils, not further worked than hot-rolled, with patterns in relief › Of a thickness of less than 4.75 mm | Free |
| 7208.25.30 | Other, in coils, not further worked than hot-rolled, pickled › Of a thickness of 4.75 mm or more › Of high-strength steel7208.25.30.00 | Free |
| 7208.25.60 | Other, in coils, not further worked than hot-rolled, pickled › Of a thickness of 4.75 mm or more | Free |
| 7208.26.00 | Other, in coils, not further worked than hot-rolled, pickled › Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7208.27.00 | Other, in coils, not further worked than hot-rolled, pickled › Of a thickness of less than 3 mm | Free |
| 7208.36.00 | Other, in coils, not further worked than hot-rolled › Of a thickness exceeding 10 mm | Free |
| 7208.37.00 | Other, in coils, not further worked than hot-rolled › Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free |
| 7208.38.00 | Other, in coils, not further worked than hot-rolled › Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7208.39.00 | Other, in coils, not further worked than hot-rolled › Of a thickness of less than 3 mm7208.39.00.25 | Free |
| 7208.40.30 | Not in coils, not further worked than hot-rolled, with patterns in relief › Of a thickness of 4.75 mm or more | Free |
| 7208.40.60 | Not in coils, not further worked than hot-rolled, with patterns in relief › Of a thickness of less than 4.75 mm | Free |
| 7208.51.00 | Other, not in coils, not further worked than hot-rolled › Of a thickness exceeding 10 mm7208.51.00.60 | Free |
| 7208.52.00 | Other, not in coils, not further worked than hot-rolled › Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free |
| 7208.53.00 | Other, not in coils, not further worked than hot-rolled › Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7208.54.00 | Other, not in coils, not further worked than hot-rolled › Of a thickness of less than 3 mm | Free |
| 7208.90.00 | Other | Free |
7209Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
| HTS code | Description | General rate |
|---|---|---|
| 7209.15.00 | In coils, not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more7209.15.00.00 | Free |
| 7209.16.00 | In coils, not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm | Free |
| 7209.17.00 | In coils, not further worked than cold-rolled (cold-reduced) › Of a thickness of 0.5 mm or more but not exceeding 1 mm | Free |
| 7209.18.15 | In coils, not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 0.5 mm › Of high-strength steel | Free |
| 7209.18.25 | In coils, not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 0.5 mm › Of a thickness of less than 0.361 mm (blackplate) | Free |
| 7209.18.60 | In coils, not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 0.5 mm | Free |
| 7209.25.00 | Not in coils, not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more | Free |
| 7209.26.00 | Not in coils, not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm | Free |
| 7209.27.00 | Not in coils, not further worked than cold-rolled (cold-reduced) › Of a thickness of 0.5 mm or more but not exceeding 1 mm | Free |
| 7209.28.00 | Not in coils, not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 0.5 mm | Free |
| 7209.90.00 | Other | Free |
7210Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated
| HTS code | Description | General rate |
|---|---|---|
| 7210.11.00 | Plated or coated with tin › Of a thickness of 0.5 mm or more | Free |
| 7210.12.00 | Plated or coated with tin › Of a thickness of less than 0.5 mm | Free |
| 7210.20.00 | Plated or coated with lead, including terne-plate | Free |
| 7210.30.00 | Electrolytically plated or coated with zinc | Free |
| 7210.41.00 | Otherwise plated or coated with zinc › Corrugated | Free |
| 7210.49.00 | Otherwise plated or coated with zinc | Free |
| 7210.50.00 | Plated or coated with chromium oxides or with chromium and chromium oxides | Free |
| 7210.61.00 | Plated or coated with aluminum › Plated or coated with aluminum-zinc alloys | Free |
| 7210.69.00 | Plated or coated with aluminum | Free |
| 7210.70.30 | Painted, varnished or coated with plastics › Not coated or plated with metal and not clad | Free |
| 7210.70.60 | Painted, varnished or coated with plastics | Free |
| 7210.90.10 | Clad | Free |
| 7210.90.60 | Electrolytically coated or plated with base metal | Free |
| 7210.90.90 | Other › Other › Other | Free |
7211Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated
| HTS code | Description | General rate |
|---|---|---|
| 7211.13.00 | Not further worked than hot-rolled › Universal mill plate | Free |
| 7211.14.00 | Not further worked than hot-rolled › Other, of a thickness of 4.75 mm or more | Free |
| 7211.19.15 | Not further worked than hot-rolled › Of a width of less than 300 mm › Of high-strength steel | Free |
| 7211.19.20 | Not further worked than hot-rolled › Of a width of less than 300 mm › Of a thickness exceeding 1.25 mm | Free |
| 7211.19.30 | Not further worked than hot-rolled › Of a width of less than 300 mm | Free |
| 7211.19.45 | Not further worked than hot-rolled › Of high-strength steel | Free |
| 7211.19.60 | Not further worked than hot-rolled › Pickled | Free |
| 7211.19.75 | Not further worked than hot-rolled | Free |
| 7211.23.15 | Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0.25 percent of carbon › Of a width of less than 300 mm › Of a thickness exceeding 1.25 mm › Of high-strength steel | Free |
| 7211.23.20 | Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0.25 percent of carbon › Of a width of less than 300 mm › Of a thickness exceeding 1.25 mm | Free |
| 7211.23.30 | Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0.25 percent of carbon › Of a width of less than 300 mm › Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | Free |
| 7211.23.45 | Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0.25 percent of carbon › Of a width of less than 300 mm › Of a thickness not exceeding 0.25 mm | Free |
| 7211.23.60 | Not further worked than cold-rolled (cold-reduced) › Containing by weight less than 0.25 percent of carbon | Free |
| 7211.29.20 | Not further worked than cold-rolled (cold-reduced) › Of a width of less than 300 mm › Of a thickness exceeding 0.25 mm | Free |
| 7211.29.45 | Not further worked than cold-rolled (cold-reduced) › Of a width of less than 300 mm | Free |
| 7211.29.60 | Not further worked than cold-rolled (cold-reduced) | Free |
| 7211.90.00 | Other | Free |
7212Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated
| HTS code | Description | General rate |
|---|---|---|
| 7212.10.00 | Plated or coated with tin | Free |
| 7212.20.00 | Electrolytically plated or coated with zinc | Free |
| 7212.30.10 | Otherwise plated or coated with zinc › Of a width of less than 300 mm › Of a thickness exceeding 0.25 mm or more | Free |
| 7212.30.30 | Otherwise plated or coated with zinc › Of a width of less than 300 mm | Free |
| 7212.30.50 | Otherwise plated or coated with zinc | Free |
| 7212.40.10 | Painted, varnished or coated with plastics › Of a width of less than 300 mm | Free |
| 7212.40.50 | Painted, varnished or coated with plastics | Free |
| 7212.50.00 | Otherwise plated or coated | Free |
| 7212.60.00 | Clad | Free |
7213Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel
| HTS code | Description | General rate |
|---|---|---|
| 7213.10.00 | Concrete reinforcing bars and rods | Free |
| 7213.20.00 | Other, of free-cutting steel | Free |
| 7213.91.30 | Of circular cross section measuring less than 14 mm in diameter › Not tempered, not treated and not partly manufactured7213.91.30.20 | Free |
| 7213.91.45 | Of circular cross section measuring less than 14 mm in diameter › Containing by weight 0.6 percent or more of carbon | Free |
| 7213.91.60 | Of circular cross section measuring less than 14 mm in diameter | Free |
| 7213.99.00 | Other › Other | Free |
7214Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
| HTS code | Description | General rate |
|---|---|---|
| 7214.10.00 | Forged | Free |
| 7214.20.00 | Concrete reinforcing bars and rods7214.20.00.00 | Free |
| 7214.30.00 | Other, of free-cutting steel | Free |
| 7214.91.00 | Of rectangular (other than square) cross-section7214.91.00.16 | Free |
| 7214.99.00 | Other › Other | Free |
7215Other bars and rods of iron or nonalloy steel
| HTS code | Description | General rate |
|---|---|---|
| 7215.10.00 | Of free-cutting steel, not further worked than cold-formed or cold-finished | Free |
| 7215.50.00 | Other, not further worked than cold-formed or cold-finished | Free |
| 7215.90.10 | Plated or coated with metal › Not cold-formed | Free |
| 7215.90.30 | Plated or coated with metal › Cold-formed | Free |
| 7215.90.50 | Other › Other | Free |
7216Angles, shapes and sections of iron or nonalloy steel
| HTS code | Description | General rate |
|---|---|---|
| 7216.10.00 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | Free |
| 7216.21.00 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm › L sections | Free |
| 7216.22.00 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm › T sections | Free |
| 7216.31.00 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more › U sections | Free |
| 7216.32.00 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more › I sections (standard beams) | Free |
| 7216.33.00 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more › H sections | Free |
| 7216.40.00 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | Free |
| 7216.50.00 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | Free |
| 7216.61.00 | Angles, shapes and sections, not further worked than cold-formed or cold-finished › Obtained from flat-rolled products | Free |
| 7216.69.00 | Angles, shapes and sections, not further worked than cold-formed or cold-finished | Free |
| 7216.91.00 | Cold-formed or cold-finished from flat-rolled products7216.91.00.107216.91.00.90 | Free |
| 7216.99.00 | Other › Other | Free |
7217Wire of iron or nonalloy steel
| HTS code | Description | General rate |
|---|---|---|
| 7217.10.10 | Not plated or coated, whether or not polished › Containing by weight less than 0.25 percent of carbon › Flat wire › Of a thickness not exceeding 0.25 mm | Free |
| 7217.10.20 | Not plated or coated, whether or not polished › Containing by weight less than 0.25 percent of carbon › Flat wire › Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm7217.10.20.00 | Free |
| 7217.10.30 | Not plated or coated, whether or not polished › Containing by weight less than 0.25 percent of carbon › Flat wire › Of a thickness exceeding 1.25 mm | Free |
| 7217.10.40 | Not plated or coated, whether or not polished › Containing by weight less than 0.25 percent of carbon › Round wire › With a diameter of less than 1.5 mm | Free |
| 7217.10.50 | Not plated or coated, whether or not polished › Containing by weight less than 0.25 percent of carbon › Round wire › With a diameter of 1.5 mm or more | Free |
| 7217.10.60 | Not plated or coated, whether or not polished › Containing by weight less than 0.25 percent of carbon › Other wire | Free |
| 7217.10.70 | Not plated or coated, whether or not polished › Flat wire | Free |
| 7217.10.80 | Not plated or coated, whether or not polished › Round wire | Free |
| 7217.10.90 | Not plated or coated, whether or not polished › Other wire | Free |
| 7217.20.15 | Plated or coated with zinc › Flat wire | Free |
| 7217.20.30 | Plated or coated with zinc › Round wire › With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon | Free |
| 7217.20.45 | Plated or coated with zinc › Round wire | Free |
| 7217.20.60 | Plated or coated with zinc › Containing by weight less than 0.25 percent of carbon | Free |
| 7217.20.75 | Plated or coated with zinc | Free |
| 7217.30.15 | Plated or coated with other base metals › Flat wire | Free |
| 7217.30.30 | Plated or coated with other base metals › Round wire › With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon | Free |
| 7217.30.45 | Plated or coated with other base metals › Round wire | Free |
| 7217.30.60 | Plated or coated with other base metals › Containing by weight less than 0.25 percent of carbon | Free |
| 7217.30.75 | Plated or coated with other base metals | Free |
| 7217.90.10 | Coated with plastics7217.90.10.00 | Free |
| 7217.90.50 | Other › Other | Free |
7218Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
| HTS code | Description | General rate |
|---|---|---|
| 7218.10.00 | Ingots and other primary forms7218.10.00.00 | Free |
| 7218.91.00 | Of rectangular (other than square) cross-section7218.91.00.60 | Free |
| 7218.99.00 | Other › Other | Free |
7219Flat-rolled products of stainless steel, of a width of 600 mm or more
| HTS code | Description | General rate |
|---|---|---|
| 7219.11.00 | Not further worked than hot-rolled, in coils › Of a thickness exceeding 10 mm | Free |
| 7219.12.00 | Not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free |
| 7219.13.00 | Not further worked than hot-rolled, in coils › Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7219.14.00 | Not further worked than hot-rolled, in coils › Of a thickness of less than 3 mm | Free |
| 7219.21.00 | Not further worked than hot-rolled, not in coils › Of a thickness exceeding 10 mm | Free |
| 7219.22.00 | Not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free |
| 7219.23.00 | Not further worked than hot-rolled, not in coils › Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7219.24.00 | Not further worked than hot-rolled, not in coils › Of a thickness of less than 3 mm | Free |
| 7219.31.00 | Not further worked than cold-rolled (cold-reduced) › Of a thickness of 4.75 mm or more | Free |
| 7219.32.00 | Not further worked than cold-rolled (cold-reduced) › Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7219.33.00 | Not further worked than cold-rolled (cold-reduced) › Of a thickness exceeding 1 mm but less than 3 mm7219.33.00.35 | Free |
| 7219.34.00 | Not further worked than cold-rolled (cold-reduced) › Of a thickness of 0.5 mm or more but not exceeding 1 mm | Free |
| 7219.35.00 | Not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 0.5 mm | Free |
| 7219.90.00 | Other | Free |
7220Flat-rolled products of stainless steel, of a width of less than 600 mm
| HTS code | Description | General rate |
|---|---|---|
| 7220.11.00 | Not further worked than hot-rolled › Of a thickness of 4.75 mm or more | Free |
| 7220.12.10 | Not further worked than hot-rolled › Of a thickness of less than 4.75 mm › Of a width of 300 mm or more | Free |
| 7220.12.50 | Not further worked than hot-rolled › Of a thickness of less than 4.75 mm › Of a width of less than 300 mm | Free |
| 7220.20.10 | Not further worked than cold-rolled (cold-reduced) › Of a width of 300 mm or more | Free |
| 7220.20.60 | Not further worked than cold-rolled (cold-reduced) › Of a width of less than 300 mm › Of a thickness exceeding 1.25 mm | Free |
| 7220.20.70 | Not further worked than cold-rolled (cold-reduced) › Of a width of less than 300 mm › Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | Free |
| 7220.20.80 | Not further worked than cold-rolled (cold-reduced) › Of a width of less than 300 mm › Of a thickness not exceeding 0.25 mm › Razor blade steel | Free |
| 7220.20.90 | Not further worked than cold-rolled (cold-reduced) › Of a width of less than 300 mm › Of a thickness not exceeding 0.25 mm | Free |
| 7220.90.00 | Other | Free |
7221Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
| HTS code | Description | General rate |
|---|---|---|
| 7221.00.00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel | Free |
7222Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
| HTS code | Description | General rate |
|---|---|---|
| 7222.11.00 | Bars and rods, not further worked than hot-rolled, hot-drawn or extruded › Of circular cross-section | Free |
| 7222.19.00 | Bars and rods, not further worked than hot-rolled, hot-drawn or extruded | Free |
| 7222.20.00 | Bars and rods, not further worked than cold-formed or cold-finished | Free |
| 7222.30.00 | Other bars and rods | Free |
| 7222.40.30 | Angles, shapes and sections › Hot-rolled, not drilled, not punched and not otherwise advanced | Free |
| 7222.40.60 | Angles, shapes and sections | Free |
7223Wire of stainless steel
| HTS code | Description | General rate |
|---|---|---|
| 7223.00.10 | Round wire | Free |
| 7223.00.50 | Flat wire7223.00.50.00 | Free |
| 7223.00.90 | Other | Free |
7224Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
| HTS code | Description | General rate |
|---|---|---|
| 7224.10.00 | Ingots and other primary forms | Free |
| 7224.90.00 | Other7224.90.00.75 | Free |
7225Flat-rolled products of other alloy steel, of a width of 600 mm or more
| HTS code | Description | General rate |
|---|---|---|
| 7225.11.00 | Of silicon electrical steel › Grain-oriented | Free |
| 7225.19.00 | Of silicon electrical steel | Free |
| 7225.30.11 | Other, not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more › Of tool steel | Free |
| 7225.30.30 | Other, not further worked than hot-rolled, in coils › Of a thickness of 4.75 mm or more | Free |
| 7225.30.51 | Other, not further worked than hot-rolled, in coils › Of a thickness of less than 4.75 mm › Of tool steel | Free |
| 7225.30.70 | Other, not further worked than hot-rolled, in coils › Of a thickness of less than 4.75 mm | Free |
| 7225.40.11 | Other, not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more › Of tool steel | Free |
| 7225.40.30 | Other, not further worked than hot-rolled, not in coils › Of a thickness of 4.75 mm or more | Free |
| 7225.40.51 | Other, not further worked than hot-rolled, not in coils › Of a thickness of less than 4.75 mm › Of tool steel | Free |
| 7225.40.70 | Other, not further worked than hot-rolled, not in coils › Of a thickness of less than 4.75 mm | Free |
| 7225.50.11 | Other, not further worked than cold-rolled (cold-reduced) › Of tool steel | Free |
| 7225.50.60 | Other, not further worked than cold-rolled (cold-reduced) › Of a thickness of 4.75 mm or more | Free |
| 7225.50.70 | Other, not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 4.75 mm › Heat-resisting steel | Free |
| 7225.50.80 | Other, not further worked than cold-rolled (cold-reduced) › Of a thickness of less than 4.75 mm | Free |
| 7225.91.00 | Electrolytically plated or coated with zinc | Free |
| 7225.92.00 | Otherwise plated or coated with zinc | Free |
| 7225.99.00 | Other › Other | Free |
7226Flat-rolled products of other alloy steel, of a width of less than 600 mm
| HTS code | Description | General rate |
|---|---|---|
| 7226.11.10 | Of silicon electrical steel › Grain-oriented › Of a width of 300 mm or more | Free |
| 7226.11.90 | Of silicon electrical steel › Grain-oriented › Of a width of less than 300 mm | Free |
| 7226.19.10 | Of silicon electrical steel › Of a width of 300 mm or more | Free |
| 7226.19.90 | Of silicon electrical steel › Of a width of less than 300 mm | Free |
| 7226.20.00 | Of high-speed steel | Free |
| 7226.91.05 | Not further worked than hot-rolled › Of tool steel (other than high-speed steel) › Of chipper knife steel | Free |
| 7226.91.15 | Not further worked than hot-rolled › Of tool steel (other than high-speed steel) › Of a width of 300 mm or more | Free |
| 7226.91.25 | Not further worked than hot-rolled › Of tool steel (other than high-speed steel) › Of a width of less than 300 mm | Free |
| 7226.91.50 | Not further worked than hot-rolled › Of a thickness of 4.75 mm or more | Free |
| 7226.91.70 | Not further worked than hot-rolled › Of a thickness of less than 4.75 mm › Of a width of 300 mm or more | Free |
| 7226.91.80 | Not further worked than hot-rolled › Of a thickness of less than 4.75 mm › Of a width of less than 300 mm | Free |
| 7226.92.10 | Not further worked than cold-rolled (cold-reduced) › Of tool steel (other than high-speed steel) › Of a width of 300 mm or more | Free |
| 7226.92.30 | Not further worked than cold-rolled (cold-reduced) › Of tool steel (other than high-speed steel) › Of a width of less than 300 mm | Free |
| 7226.92.50 | Not further worked than cold-rolled (cold-reduced) › Of a width of 300 mm or more | Free |
| 7226.92.70 | Not further worked than cold-rolled (cold-reduced) › Of a width of less than 300 mm › Of a thickness not exceeding 0.25 mm | Free |
| 7226.92.80 | Not further worked than cold-rolled (cold-reduced) › Of a width of less than 300 mm › Of a thickness exceeding 0.25 mm | Free |
| 7226.99.01 | Other › Other | Free |
7227Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
| HTS code | Description | General rate |
|---|---|---|
| 7227.10.00 | Of high-speed steel | Free |
| 7227.20.00 | Of silico-manganese steel | Free |
| 7227.90.10 | Of tool steel (other than high-speed steel) › Not tempered, not treated, and not partly manufactured | Free |
| 7227.90.20 | Of tool steel (other than high-speed steel) | Free |
| 7227.90.60 | Other › Other | Free |
7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
| HTS code | Description | General rate |
|---|---|---|
| 7228.10.00 | Bars and rods, of high-speed steel | Free |
| 7228.20.10 | Bars and rods, of silico-manganese steel › Not cold-formed | Free |
| 7228.20.50 | Bars and rods, of silico-manganese steel › Cold-formed | Free |
| 7228.30.20 | Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded › Of tool steel (other than high-speed steel) › Of ball-bearing steel | Free |
| 7228.30.40 | Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded › Of tool steel (other than high-speed steel) › Of chipper knife steel, not cold-formed | Free |
| 7228.30.60 | Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded › Of tool steel (other than high-speed steel) | Free |
| 7228.30.80 | Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded | Free |
| 7228.40.00 | Other bars and rods, not further worked than forged | Free |
| 7228.50.10 | Other bars and rods, not further worked than cold-formed or cold-finished › Of tool steel (other than high-speed steel)7228.50.10.207228.50.10.40 | Free |
| 7228.50.50 | Other bars and rods, not further worked than cold-formed or cold-finished | Free |
| 7228.60.10 | Other bars and rods › Of tool steel (other than high-speed steel) | Free |
| 7228.60.60 | Other bars and rods › Not cold-formed | Free |
| 7228.60.80 | Other bars and rods › Cold-formed | Free |
| 7228.70.30 | Angles, shapes and sections › Hot-rolled, not drilled, not punched and not otherwise advanced | Free |
| 7228.70.60 | Angles, shapes and sections | Free |
| 7228.80.00 | Hollow drill bars and rods | Free |
7229Wire of other alloy steel
| HTS code | Description | General rate |
|---|---|---|
| 7229.20.00 | Of silico-manganese steel | Free |
| 7229.90.05 | Of high-speed steel | Free |
| 7229.90.10 | Flat wire | Free |
| 7229.90.50 | Round wire | Free |
| 7229.90.90 | Other wire | Free |
Descriptions and general rates from the current USITC Harmonized Tariff Schedule. The general rate excludes additional duties such as Section 301, Section 232 and antidumping or countervailing duties, which depend on the country of origin.