HTS chapter 74
HTS chapter 74: copper codes and duty rates
Chapter 74 of the Harmonized Tariff Schedule of the United States has 16 headings and 89 rate lines, split into 136 ten-digit statistical codes. Each heading below lists its rate lines with the official description and the general (Column 1) rate of duty. The general rate is only the starting point: Section 301, Section 232 and other programs can add to it depending on the country of origin, and the calculator applies them for any line.
7401Copper mattes; cement copper (precipitated copper)
| HTS code | Description | General rate |
|---|---|---|
| 7401.00.00 | Copper mattes; cement copper (precipitated copper) | Free |
7402Unrefined copper; copper anodes for electrolytic refining
| HTS code | Description | General rate |
|---|---|---|
| 7402.00.00 | Unrefined copper; copper anodes for electrolytic refining | Free |
7403Refined copper and copper alloys, unwrought (other than master alloys of heading 7405)
| HTS code | Description | General rate |
|---|---|---|
| 7403.11.00 | Refined copper cathodes and sections | 1% |
| 7403.12.00 | Refined copper › Wire bars | 1% |
| 7403.13.00 | Refined copper › Billets | 1% |
| 7403.19.00 | Refined copper | 1% |
| 7403.21.00 | Copper alloys › Copper-zinc base alloys (brass) | 1% |
| 7403.22.00 | Copper alloys › Copper-tin base alloys (bronze) | 1% |
| 7403.29.01 | Copper alloys › Other copper alloys7403.29.01.80 | 1% |
7404Copper waste and scrap
| HTS code | Description | General rate |
|---|---|---|
| 7404.00.30 | Spent anodes; waste and scrap with a copper content of less than 94 percent by weight7404.00.30.65 | Free |
| 7404.00.60 | Other | Free |
7405Master alloys of copper
| HTS code | Description | General rate |
|---|---|---|
| 7405.00.10 | Containing by weight 5 percent or more but not more than 15 percent of phosphorus | Free |
| 7405.00.60 | Other | Free |
7406Copper powders and flakes
| HTS code | Description | General rate |
|---|---|---|
| 7406.10.00 | Powders of non-lamellar structure | Free |
| 7406.20.00 | Powders of lamellar structure; flakes | Free |
7407Copper bars, rods and profiles
| HTS code | Description | General rate |
|---|---|---|
| 7407.10.15 | Of refined copper › Profiles › Hollow profiles | 3% |
| 7407.10.30 | Of refined copper › Profiles | 3% |
| 7407.10.50 | Of refined copper › Bars and rods | 1% |
| 7407.21.15 | Of copper alloys › Of copper-zinc base alloys (brass) › Profiles › Hollow profiles | 2.2% |
| 7407.21.30 | Of copper alloys › Of copper-zinc base alloys (brass) › Profiles | 2.2% |
| 7407.21.50 | Of copper alloys › Of copper-zinc base alloys (brass) › Bars and rods › Low fuming brazing rods | 2.2% |
| 7407.21.70 | Of copper alloys › Of copper-zinc base alloys (brass) › Bars and rods › Having a rectangular cross section | 1.9% |
| 7407.21.90 | Of copper alloys › Of copper-zinc base alloys (brass) › Bars and rods | 2.2% |
| 7407.29.16 | Of copper alloys › Profiles › Hollow | 3% |
| 7407.29.34 | Of copper alloys › Profiles › Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 3% |
| 7407.29.38 | Of copper alloys › Profiles | 3% |
| 7407.29.40 | Of copper alloys › Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 3% |
| 7407.29.50 | Of copper alloys › Other bars and rods | 1.6% |
7408Copper wire
| HTS code | Description | General rate |
|---|---|---|
| 7408.11.30 | Of refined copper › Of which the maximum cross-sectional dimension exceeds 6 mm › With a maximum cross-sectional dimension over 9.5 mm7408.11.30.00 | 1% |
| 7408.11.60 | Of refined copper › Of which the maximum cross-sectional dimension exceeds 6 mm › With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm7408.11.60.00 | 3% |
| 7408.19.00 | Of refined copper | 3% |
| 7408.21.00 | Of copper alloys › Of copper-zinc base alloys (brass) | 3% |
| 7408.22.10 | Of copper alloys › Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) › Coated or plated with metal | 3% |
| 7408.22.50 | Of copper alloys › Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) › Not coated or plated with metal | 3% |
| 7408.29.10 | Of copper alloys › Coated or plated with metal | 3% |
| 7408.29.50 | Of copper alloys › Not coated or plated with metal | 3% |
7409Copper plates, sheets and strip, of a thickness exceeding 0.15 mm
| HTS code | Description | General rate |
|---|---|---|
| 7409.11.10 | Of refined copper › In coils › Of a thickness of 5 mm or more | 3% |
| 7409.11.50 | Of refined copper › In coils › Of a thickness of less than 5 mm | 1% |
| 7409.19.10 | Of refined copper › Of a thickness of 5 mm or more | 3% |
| 7409.19.50 | Of refined copper › Of a thickness of less than 5 mm › Of a width of 500 mm or more | 1% |
| 7409.19.90 | Of refined copper › Of a thickness of less than 5 mm › Of a width of less than 500 mm | 3% |
| 7409.21.00 | Of copper-zinc base alloys (brass) › In coils | 1.9% |
| 7409.29.00 | Of copper-zinc base alloys (brass) | 1.9% |
| 7409.31.10 | Of copper-tin base alloys (bronze) › In coils › Of a thickness of 5 mm or more | 3% |
| 7409.31.50 | Of copper-tin base alloys (bronze) › In coils › Of a thickness of less than 5 mm › Of a width of 500 mm or more | 1.7% |
| 7409.31.90 | Of copper-tin base alloys (bronze) › In coils › Of a thickness of less than 5 mm › Of a width of less than 500 mm | 3% |
| 7409.39.10 | Of copper-tin base alloys (bronze) › Of a thickness of 5 mm or more | 3% |
| 7409.39.50 | Of copper-tin base alloys (bronze) › Of a thickness of less than 5 mm › Of a width of 500 mm or more | 1.7% |
| 7409.39.90 | Of copper-tin base alloys (bronze) › Of a thickness of less than 5 mm › Of a width of less than 500 mm | 3% |
| 7409.40.00 | Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver) | 3% |
| 7409.90.10 | Of other copper alloys › Of a thickness of 5 mm or more | 3% |
| 7409.90.50 | Of other copper alloys › Of a thickness of less than 5 mm › Of a width of 500 mm or more | 1.7% |
| 7409.90.90 | Of other copper alloys › Of a thickness of less than 5 mm › Of a width of less than 500 mm | 3% |
7410Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm
| HTS code | Description | General rate |
|---|---|---|
| 7410.11.00 | Copper foil, not backed, refined | 1% |
| 7410.12.00 | Not backed › Of copper alloys | 1% |
| 7410.21.30 | Backed › Of refined copper › Copper clad laminates | 3% |
| 7410.21.60 | Backed › Of refined copper | 1.5% |
| 7410.22.00 | Backed › Of copper alloys | 1.5% |
7411Copper tubes and pipes
| HTS code | Description | General rate |
|---|---|---|
| 7411.10.10 | Of refined copper › Seamless | 1.5% |
| 7411.10.50 | Of refined copper | 3% |
| 7411.21.10 | Of copper alloys › Of copper-zinc base alloys (brass) › Seamless | 1.4% |
| 7411.21.50 | Of copper alloys › Of copper-zinc base alloys (brass) | 3% |
| 7411.22.00 | Of copper alloys › Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silver) | 3% |
| 7411.29.10 | Of copper alloys › Seamless | 1.4% |
| 7411.29.50 | Of copper alloys | 3% |
7412Copper tube or pipe fittings (for example couplings, elbows, sleeves)
| HTS code | Description | General rate |
|---|---|---|
| 7412.10.00 | Of refined copper | 3% |
| 7412.20.00 | Of copper alloys7412.20.00.457412.20.00.90 | 3% |
7413Stranded wire, cables, plaited bands and the like, including slings and similar articles, of copper, not electrically insulated
| HTS code | Description | General rate |
|---|---|---|
| 7413.00.10 | Not fitted with fittings and not made up into articles › Stranded wire | 3% |
| 7413.00.50 | Not fitted with fittings and not made up into articles | 2% |
| 7413.00.90 | Fitted with fittings or made up into articles | 3% |
7415Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper
| HTS code | Description | General rate |
|---|---|---|
| 7415.10.00 | Nails and tacks, drawing pins, staples and similar articles | 2.5% |
| 7415.21.00 | Other articles, not threaded › Washers (including spring washers)7415.21.00.00 | 3% |
| 7415.29.00 | Other articles, not threaded | 3% |
| 7415.33.05 | Other threaded articles › Screws, bolts and nuts › Screws for wood | 3% |
| 7415.33.10 | Other threaded articles › Screws, bolts and nuts › Muntz or yellow metal bolts | 1.4% |
| 7415.33.80 | Other threaded articles › Screws, bolts and nuts › Other screws and bolts; nuts | 3% |
| 7415.39.00 | Other threaded articles | 3% |
7418Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper
| HTS code | Description | General rate |
|---|---|---|
| 7418.10.00 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like | 3% |
| 7418.20.10 | Sanitary ware and parts thereof › Of copper-zinc base alloys (brass)7418.20.10.00 | 3% |
| 7418.20.50 | Sanitary ware and parts thereof | 3% |
7419Other articles of copper
| HTS code | Description | General rate |
|---|---|---|
| 7419.20.00 | Cast, molded, stamped or forged, but not further worked | Free |
| 7419.80.03 | Cloth (including endless bands), grill and netting, of copper wire; expanded metal of copper › Cloth › Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94 or more wires to the lineal centimeter | Free |
| 7419.80.06 | Cloth (including endless bands), grill and netting, of copper wire; expanded metal of copper › Cloth | 3% |
| 7419.80.09 | Cloth (including endless bands), grill and netting, of copper wire; expanded metal of copper | 3% |
| 7419.80.15 | Containers of a kind normally carried on the person, in the pocket or in the handbag | 3% |
| 7419.80.16 | Copper springs | 3% |
| 7419.80.17 | Chain and parts thereof | 3% |
| 7419.80.30 | Coated or plated with precious metal | 3% |
| 7419.80.50 | Other › Other › Other | Free |
Descriptions and general rates from the current USITC Harmonized Tariff Schedule. The general rate excludes additional duties such as Section 301, Section 232 and antidumping or countervailing duties, which depend on the country of origin.