HTS chapter 76
HTS chapter 76: aluminum codes and duty rates
Chapter 76 of the Harmonized Tariff Schedule of the United States has 16 headings and 65 rate lines, split into 129 ten-digit statistical codes. Each heading below lists its rate lines with the official description and the general (Column 1) rate of duty. The general rate is only the starting point: Section 301, Section 232 and other programs can add to it depending on the country of origin, and the calculator applies them for any line.
7601Unwrought aluminum
| HTS code | Description | General rate |
|---|---|---|
| 7601.10.30 | Aluminum, not alloyed › Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | 2.6% |
| 7601.10.60 | Aluminum, not alloyed7601.10.60.90 | Free |
| 7601.20.30 | Aluminum alloys › Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | 2.6% |
| 7601.20.60 | Aluminum alloys › Containing 25 percent or more by weight of silicon | 2.1% |
| 7601.20.90 | Aluminum alloys | Free |
7602Aluminum waste and scrap
| HTS code | Description | General rate |
|---|---|---|
| 7602.00.00 | Aluminum waste and scrap7602.00.00.65 | Free |
7603Aluminum powders and flakes
| HTS code | Description | General rate |
|---|---|---|
| 7603.10.00 | Powders of non-lamellar structure | 5% |
| 7603.20.00 | Powders of lamellar structure; flakes | 3.9% |
7604Aluminum bars, rods and profiles
| HTS code | Description | General rate |
|---|---|---|
| 7604.10.10 | Of aluminum, not alloyed › Profiles7604.10.10.00 | 5% |
| 7604.10.30 | Of aluminum, not alloyed › Bars and rods › Having a round cross section | 2.6% |
| 7604.10.50 | Of aluminum, not alloyed › Bars and rods | 3% |
| 7604.21.00 | Of aluminum alloys › Hollow profiles | 1.5% |
| 7604.29.10 | Of aluminum alloys › Other profiles7604.29.10.10 | 5% |
| 7604.29.30 | Of aluminum alloys › Bars and rods › Having a round cross section | 2.6% |
| 7604.29.50 | Of aluminum alloys › Bars and rods | 3% |
7605Aluminum wire
| HTS code | Description | General rate |
|---|---|---|
| 7605.11.00 | Of aluminum, not alloyed › Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% |
| 7605.19.00 | Of aluminum, not alloyed7605.19.00.00 | 4.2% |
| 7605.21.00 | Of aluminum alloys › Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% |
| 7605.29.00 | Of aluminum alloys | 4.2% |
7606Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm
| HTS code | Description | General rate |
|---|---|---|
| 7606.11.30 | Rectangular (including square) › Of aluminum, not alloyed › Not clad7606.11.30.60 | 3% |
| 7606.11.60 | Rectangular (including square) › Of aluminum, not alloyed › Clad | 2.7% |
| 7606.12.30 | Rectangular (including square) › Of aluminum alloys › Not clad | 3% |
| 7606.12.60 | Rectangular (including square) › Of aluminum alloys › Clad | 6.5% |
| 7606.91.30 | Of aluminum, not alloyed › Not clad | 3% |
| 7606.91.60 | Of aluminum, not alloyed › Clad | 2.7% |
| 7606.92.30 | Of aluminum alloys › Not clad | 3% |
| 7606.92.60 | Of aluminum alloys › Clad | 6.5% |
7607Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm
| HTS code | Description | General rate |
|---|---|---|
| 7607.11.30 | Not backed › Rolled but not further worked › Of a thickness not exceeding 0.15 mm: › Of a thickness not exceeding 0.01 mm | 5.8% |
| 7607.11.60 | Not backed › Rolled but not further worked › Of a thickness not exceeding 0.15 mm: › Of a thickness exceeding 0.01 mm | 5.3% |
| 7607.11.90 | Not backed › Rolled but not further worked | 3% |
| 7607.19.10 | Not backed › Etched capacitor foil | 5.3% |
| 7607.19.30 | Not backed › Cut to shape, of a thickness not exceeding 0.15 mm7607.19.30.00 | 5.7% |
| 7607.19.60 | Not backed | 3% |
| 7607.20.10 | Backed › Covered or decorated with a character, design, fancy effect or pattern | 3.7% |
| 7607.20.50 | Backed | Free |
7608Aluminum tubes and pipes
| HTS code | Description | General rate |
|---|---|---|
| 7608.10.00 | Of aluminum, not alloyed | 5.7% |
| 7608.20.00 | Of aluminum alloys | 5.7% |
7609Aluminum tube or pipe fittings
| HTS code | Description | General rate |
|---|---|---|
| 7609.00.00 | Aluminum tube or pipe fittings | 5.7% |
7610Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures
| HTS code | Description | General rate |
|---|---|---|
| 7610.10.00 | Doors, windows and their frames and thresholds for doors7610.10.00.107610.10.00.30 | 5.7% |
| 7610.90.00 | Other7610.90.00.80 | 5.7% |
7611Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
| HTS code | Description | General rate |
|---|---|---|
| 7611.00.00 | Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment | 2.6% |
7612Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
| HTS code | Description | General rate |
|---|---|---|
| 7612.10.00 | Collapsible tubular containers | 2.4% |
| 7612.90.10 | Of a capacity not exceeding 20 liters | 5.7% |
| 7612.90.50 | Other › Other7612.90.50.00 | Free |
7613Aluminum containers for compressed or liquefied gas
| HTS code | Description | General rate |
|---|---|---|
| 7613.00.00 | Aluminum containers for compressed or liquefied gas | 5% |
7614Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated
| HTS code | Description | General rate |
|---|---|---|
| 7614.10.10 | With steel core › Not fitted with fittings and not made up into articles | 4.9% |
| 7614.10.50 | With steel core › Fitted with fittings or made up into articles7614.10.50.00 | 4.9% |
| 7614.90.20 | Not fitted with fittings and not made up into articles › Electrical conductors | 4.9% |
| 7614.90.40 | Not fitted with fittings and not made up into articles | 4.9% |
| 7614.90.50 | Fitted with fittings or made up into articles7614.90.50.00 | 5.7% |
7615Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum
| HTS code | Description | General rate |
|---|---|---|
| 7615.10.11 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like › Pot scourers and scouring or polishing pads, gloves and the like | 3.1% |
| 7615.10.20 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like › Cooking and kitchen ware › Enameled or glazed or containing nonstick interior finishes › Cast7615.10.20.25 | 3.1% |
| 7615.10.30 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like › Cooking and kitchen ware › Enameled or glazed or containing nonstick interior finishes | 3.1% |
| 7615.10.50 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like › Cooking and kitchen ware › Not enameled or glazed and not containing nonstick interior finishes › Cast | 3.1% |
| 7615.10.71 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like › Cooking and kitchen ware › Not enameled or glazed and not containing nonstick interior finishes7615.10.71.25 | 3.1% |
| 7615.10.91 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like | 3.1% |
| 7615.20.00 | Sanitary ware and parts thereof | 3.8% |
7616Other articles of aluminum
| HTS code | Description | General rate |
|---|---|---|
| 7616.10.10 | Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles › Nails, tacks and staples | 5.7% |
| 7616.10.30 | Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles › Rivets | 4.7% |
| 7616.10.50 | Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles › Cotters and cotter pins | 5.7% |
| 7616.10.70 | Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles › Having shanks, threads or holes over 6 mm in diameter | 5.5% |
| 7616.10.90 | Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles | 6% |
| 7616.91.00 | Cloth, grill, netting and fencing, of aluminum wire | 2.5% |
| 7616.99.10 | Luggage frames | Free |
| 7616.99.51 | Other › Other › Other7616.99.51.607616.99.51.757616.99.51.90 | 2.5% |
Descriptions and general rates from the current USITC Harmonized Tariff Schedule. The general rate excludes additional duties such as Section 301, Section 232 and antidumping or countervailing duties, which depend on the country of origin.